Triple Stack System Stands
BS-TS
BHS Triple Stack System Stands (BS-TS) provide the ideal location to charge, store, and exchange lift truck batteries with convenience and ease. These heavy-duty, steel-constructed stands complement a Triple Stack Operator Aboard Battery Extractor.
The BS-TS features a welded steel frame with powder coat finish to resist scratches and corrosion in a harsh battery room environment. A rearward pitch and flip-up battery stop keep batteries secure even if heavy vibrations rattle them.
Battery beds feature poly-sleeved rollers that prevent sparking and reduce corrosive buildup. Multiple safety features protect staff members while the ergonomic design allows them to efficiently charge batteries. Over a dozen compartment configurations, safety features, and other options are available to provide custom solutions for your operation.
Optimize your battery room with a Triple Stack System Stand from BHS. Contact our sales team at +1 314 423 2075 to learn more about BHS System Stands or to locate a dealer.
- Spark-proof, poly-sleeved rollers reduce corrosive build-up and extend product life
- Models available in various compartment widths to accommodate batteries from 15” to 48” (381 mm to 1219 mm)
- 40” (1016 mm) standard compartment depth
- Hitch pin-secured roller axles for ease of maintenance
- Rearward-pitched battery slots to assist in battery retention
- Welded system feet
- Six rollers per compartment
- Foot pad dimensions: 0.75” x 6” x 8” (19 mm x 152 mm x 203 mm)
- Charger connector mounting holes
- Charger cable routing holes help protect cables from damage
- Charger anchoring slots for securing most makes of chargers
- Auxiliary backstops provide compartment depths from 27.5” to 40” (699 mm to 1016 mm)
- Custom designs available to fit all battery changing requirements
- Catwalk (BS-CW)
- Provides walk area for charger maintenance and comes standard with front rail
- Ladder (BS-LDR)
- Provides easy access to catwalk used for charger maintenance
- End Rail (BS-CW-ER)
- Encloses charger servicing area on end of system
- Rear Rail (BS-CW-RR)
- Encloses charger servicing area on rear of system
- Extended Compartment Depth (-46)
- Increases roller compartment depth to 46” (1168 mm)
- Extended Compartment Depth (-48)
- Increases roller compartment depth to 48” (1219 mm)
- Extended Compartment Depth (-50)
- Increases roller compartment depth to 50” (1270 mm)
- Drip Pan (DP)
- Contains spills, maintaining a cleaner, safer environment
- Poly Lead Roller
- Replaces the first roller in each compartment with a polyethylene roller to eliminate potential bearing failure in frequent change-out environments
- Rubber Backstop (BS-RBR-STP)
- Cushions battery during placement into stand
Note: One per stand required, slightly reduces compartment depth - Sliding SB Connector Kit (#80892001)
- Allows SB connector to be moved and secured anywhere along the length of the SB connector bracket
- Rear Strut Mount (BS-RSM)
- Mount vertical style chargers along the rear of multi-level battery stands on a welded strut channel
- Top Strut Mount (BS-TSM)
- Mount vertical style chargers above multi-level battery stands on a welded strut channel. Adequate clearance required.
- BS-15-6-TS
- BS-15-12-TS
- BS-18-6-TS
- BS-18-12-TS
- BS-21-6-TS
- BS-21-12-TS
- BS-24-6-TS
- BS-24-12-TS
- BS-30-3-TS
- BS-30-6-TS
- BS-36-3-TS
- BS-36-6-TS
- BS-42-3-TS
- BS-42-6-TS
- BS-48-3-TS
- BS-48-6-TS
